# Feather & Beetle parts
**URL:** https://forum.bristolbotbuilders.com/t/feather-beetle-parts/216
**Category:** For Sale & Services
**Tags:** featherweight-13-6kg, beetleweight-1-5kg
**Created:** [1 February 2024 17:48 UTC](https://forum.bristolbotbuilders.com/t/feather-beetle-parts/216 "2024-02-01T17:48:45Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@will\_teamshock](https://forum.bristolbotbuilders.com/u/will_teamshock)
#### Post date: [1 February 2024 17:48 UTC](https://forum.bristolbotbuilders.com/t/feather-beetle-parts/216/1 "2024-02-01T17:48:45Z")
I’ve got a few parts up for sale. Give me a shout if interested. Postage will be separate or delivery to the Beetle Brawl available.
**SOLD- Taranis X-Lite Transmitter- £60**
Bought used a while ago but never set it up.
**2x FrSky X6R recievers- £30 for both**
Bought new and removed from packaging but never used.
_Photo to follow_
**Turnigy Evolution Tx- £30**
Used as a PC controller for a while- since upgraded so no longer needed.
**SOLD- 6x Hoverboard Hub Motors- £50 for all 6**
Bought as a test and ran well using some sensorless ESCs.
**SOLD- 6x Hoverboard Hub motor mounting plates- £10 for all 6**
Clamp plates to fit the hoverboard motors. Takes M8 bolts.
**2x 18v drills- £20 for both**
Complete with batteries and charger- barely used as the batteries don’t hold their charge very well. Also comes with the case.
**SOLD- 2x REC gearboxes- £15 for both**
The motors need replacing as both are cooked. The gearboxes will need some TLC and likely new bearings. Could be good for someone willing to put a little effort into them.
**Pair of brushed ESCs with complete wiring loom- £20**
A complete wiring setup with a pair of brushed ESCs- I use these controllers in all of my brushed feathers with good results. Having swapped to brushless in a few machines I no longer need these. This includes a complete wiring loom including link and LED so great for a new roboteer.
**Pair of brushed ESCs- £15**
Same as above but without the wiring loom
**Kingmodel Dual brushed ESC- £10**
Bought as a spare for Soundwave for labman last year but never used in combat. Modified to replace the switch with a soldered jumper.
**50mm bore, 100mm stroke Festo Low Pressure Pneumatic Cylinder- £20**
never used
**SOLD- 50mm bore, 50mm stroke SMC Low Pressure Pneumatic Cylinder- £20**
never used
**SOLD- 12v compressor- £5**
Bought used a while ago as a spare for Airwave- no cable so you would need to solder wires to the motor to use it.
**3x RC aircraft air retract tanks**
**SOLD- CO2 regulator for threaded cartridges- £15**
This is the 150psi version which takes the threaded CO2 cartridges. Brand new in box and never used.
---
### Author:  [@MichaelMG](https://forum.bristolbotbuilders.com/u/MichaelMG)
#### Post date: [1 February 2024 20:08 UTC](https://forum.bristolbotbuilders.com/t/feather-beetle-parts/216/2 "2024-02-01T20:08:22Z")
What are the specs for the blue esc’s please?
---
### Author:  [@will\_teamshock](https://forum.bristolbotbuilders.com/u/will_teamshock)
#### Post date: [2 February 2024 16:38 UTC](https://forum.bristolbotbuilders.com/t/feather-beetle-parts/216/4 "2024-02-02T16:38:20Z")
Just updated the post to show what is left.
The blue ESCs are rated to 3s and claim 160A (I think 20-30A is a more reasonable guess). I have used these in most of my feathers before converting to brushless with 540, 775 and even speed 900 motors.
---
### Author:  [@McMullet](https://forum.bristolbotbuilders.com/u/McMullet)
#### Post date: [14 February 2024 22:17 UTC](https://forum.bristolbotbuilders.com/t/feather-beetle-parts/216/5 "2024-02-14T22:17:32Z")
Hi, I’m interested in the Kingmodel dual ESC if it’s still available?