# How can I Improve wire management?

**URL:** https://forum.bristolbotbuilders.com/t/how-can-i-improve-wire-management/781
**Category:** Questions & Help
**Tags:** electronics, beetleweight-1-5kg
**Created:** [9 September 2026 19:59 UTC](https://forum.bristolbotbuilders.com/t/how-can-i-improve-wire-management/781 "2026-09-09T19:59:40Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Turtle](https://forum.bristolbotbuilders.com/user_avatar/forum.bristolbotbuilders.com/turtle/32/6669_2.png) [@Turtle](https://forum.bristolbotbuilders.com/u/Turtle)
#### Post date: [9 September 2026 19:59 UTC](https://forum.bristolbotbuilders.com/t/how-can-i-improve-wire-management/781/1 "2026-09-09T19:59:41Z")

</div>

I have been having problems when it come to wiring my bot. No matter what I have tryed it all ways ended up as a tangled mess of wires any ideas how I can stop this.

---

<div class="post-metadata">

### Author: ![Craig](https://forum.bristolbotbuilders.com/user_avatar/forum.bristolbotbuilders.com/craig/32/48_2.png) [@Craig](https://forum.bristolbotbuilders.com/u/Craig)
#### Post date: [9 September 2026 20:46 UTC](https://forum.bristolbotbuilders.com/t/how-can-i-improve-wire-management/781/2 "2026-09-09T20:46:57Z")

</div>

if it fits, it sits.

---

<div class="post-metadata">

### Author: ![TeamChiffChaffs7](https://forum.bristolbotbuilders.com/user_avatar/forum.bristolbotbuilders.com/teamchiffchaffs7/32/7847_2.png) [@TeamChiffChaffs7](https://forum.bristolbotbuilders.com/u/TeamChiffChaffs7)
#### Post date: [10 September 2026 04:14 UTC](https://forum.bristolbotbuilders.com/t/how-can-i-improve-wire-management/781/3 "2026-09-10T04:14:36Z")

</div>

Buy a few Wago connectors.

---

<div class="post-metadata">

### Author: ![hhills](https://forum.bristolbotbuilders.com/user_avatar/forum.bristolbotbuilders.com/hhills/32/73_2.png) [@hhills](https://forum.bristolbotbuilders.com/u/hhills)
#### Post date: [10 September 2026 07:49 UTC](https://forum.bristolbotbuilders.com/t/how-can-i-improve-wire-management/781/4 "2026-09-10T07:49:26Z")

</div>

A picture of what you currently have is probably helpful. It also matters a bit what class it is as how you’d approach a 150g ant is very different from a beetle, which is in turn different to a feather.

Simplifying your loom, thinking about where you have terminations or joins and points to cable tie are great places to start.
