# Yellow TPU no longer exists?
**URL:** https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797
**Category:** Questions & Help
**Tags:** building, beetleweight-1-5kg
**Created:** [21 September 2026 16:46 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797 "2026-09-21T16:46:36Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@KJRhys](https://forum.bristolbotbuilders.com/u/KJRhys)
#### Post date: [21 September 2026 16:46 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/1 "2026-09-21T16:46:36Z")
chat am I cooked?
Over the years I’ve had to bounce between a good few brands of the yellow tpu I use on literally all my robots. These seem to have progressively got worse and worse from the nice sunflower yellow on the original JackHammer to the more luminous ugly shade I’ve been using recently. even keeping the brand the same the shade seems to be becoming more transparent and vomity with every new spool.
The issue I’m having now is that I can’t find ANY 95A tpu in a yellow that doesn’t look completely horrific. It seems to me like yellow simply isn’t selling because most brands seem to offer like 4 different shades of beige and not a single yellow. try it! please advise. Ideally I’m looking for a supplier where I can buy a lifetime supply from now so I don’t have to have a stress breakdown over the colour yellow again thx. x
current best I can find and it’s even worse in person
also note ideally I wouldn’t be paying like £40 per kg but I fear I may have to at this rate. I have found a couple of candidates at this price point on 3d Jake but ideally looking to avoid this if I’m trying to build a larger robot lol
---
### Author:  [@TheVigilante](https://forum.bristolbotbuilders.com/u/TheVigilante)
#### Post date: [21 September 2026 16:59 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/2 "2026-09-21T16:59:21Z")
I got you, fam! Buy the TPU you normally use in white, print out the part you need and then get yourself some of this.
This is Rit DyeMore. What sets it apart from the regular Rit Dyes is that it is it works really well with TPU! I should know, I use it on Sunday Drive!
---
### Author:  [@HBantweightrobots](https://forum.bristolbotbuilders.com/u/HBantweightrobots)
#### Post date: [21 September 2026 17:30 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/3 "2026-09-21T17:30:31Z")
> **[123-3D.co.uk - 3D-printers | kits | parts | filament](https://www.123-3d.co.uk/Polymaker-PolyFlex-yellow-TPU95-filament-1-75mm-0-75kg-70109-PD01004-PM70109-i7629.html)**
>
> Cheap 3D printers | filament | 3D accessories ✔ Lowest price guarantee! ✔ Order before 5.30pm, shipped same day ✔ Secure payment ✔ Reliable and fast service
> **[PRILINE TPU-1KG 1.75 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1kg...](https://www.amazon.co.uk/Flexible-Filament-PRILINE-Printing-Printer/dp/B0DDKFTRS8)**
>
> TPU Flexible 3D Printer Filament Material Characteristics: 1.PRILINE TPU Flexible filament should be printed at lower speed than normal. And printing nozzle type Direct Drive (motor attached to the nozzle) due to its soft lines. 2.TPU Flexible...
> **[PrimaCreator™ EasyPrint FLEX 95A](https://www.3dprima.co.uk/primacreator/primacreator-easyprint-flex-95a-base-5243?srsltid=AU7gw4VMBSSB1KmGc5cxX8da72x2tG0lqv4mnHw1K1Dk5v1C8etI02dD2Bw)**
>
> 3D printing easy & flexible - Buy EasyPrint FLEX filament from PrimaCreator for your 3D printer. The flexible filament is durable, flexible and very user-friendly. EasyPrint FLEX is based on TPU and offers you numerous advantages. Easily 3D print...
> **[PolyFlex TPU95 Yellow 1.75mm](https://www.3djake.uk/polymaker/polyflex-yellow?sai=1177)**
>
> Flexible yellow filament. Price: £32.00. Delivery in 5 days.
---
### Author:  [@hhills](https://forum.bristolbotbuilders.com/u/hhills)
#### Post date: [21 September 2026 18:25 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/4 "2026-09-21T18:25:42Z")
As a man who also indulges in the yellow life I share your pain. That’s the real reason I don’t build MotherLoaders anymore.
Overture are my go to but unsurprisingly OOS. I’ll be watching this thread with interest.
---
### Author:  [@HBantweightrobots](https://forum.bristolbotbuilders.com/u/HBantweightrobots)
#### Post date: [21 September 2026 18:42 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/5 "2026-09-21T18:42:54Z")
Overture does stick some yellow high speed tpu, but not sure if that’s what your looking for.
---
### Author:  [@ForkliftCertified](https://forum.bristolbotbuilders.com/u/ForkliftCertified)
#### Post date: [21 September 2026 20:09 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/6 "2026-09-21T20:09:58Z")
[SainSmart 32595405 Neon Color TPU, 1.75mm Flexible TPU 3D Printer Filament 800g, Dimensional Accuracy +/- 0.05 mm, Neon Yellow : Amazon.co.uk: Business, Industry & Science](https://amzn.eu/d/0bkrTLCa) Sainsmart Neon Yellow has been my go-to for about 3 years now, an oasis of decent in a sea of puke.
---
### Author:  [@KJRhys](https://forum.bristolbotbuilders.com/u/KJRhys)
#### Post date: [22 September 2026 16:28 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/7 "2026-09-22T16:28:14Z")
Thank you all!! I knew the forum wouldn’t disappoint
Have ordered a couple of different spools to go head to head and will mass order the best one lol
great to see my fellow yellow lovers have my back 💛💛
---
### Author:  [@TBExtent](https://forum.bristolbotbuilders.com/u/TBExtent)
#### Post date: [23 September 2026 08:56 UTC](https://forum.bristolbotbuilders.com/t/yellow-tpu-no-longer-exists/797/8 "2026-09-23T08:56:46Z")
I’m a polymaker yellow enjoyer. It’s fairly spenny for tpu, but is a very nice shade of yellow (and colour matches with yellow hdpe pretty well)