OW hay, hear is a Lil spinny tail Boi ( his name is Barry) desighned my the lovely Katana and built by myself, Joy.
Aqiaholic is a 2WD Horizontal with a pivoting tail and a fun StingRay/MantaRay asthetic 
The Chassi is built up of a 20mm HDPE billet with a 5mm Hdpe Lid and a 3mm Lexan Base.
The Spinner on the lil man is a Hub Motor made up of a sunny sky (pretty small) 1500KV motor. capped in an alu housing with Nice keyed caps on some de greased Bearings to make it buttery smooth (in a less longevity Kinda Way) you love to hear it.
but wait thears more…
Another one
The spinner sits in a nice Gluten free 3mm Carbon Fiber Sandwich and is retained with 2x M3 Boltys on each end with a M6 Threaded shafts for dissasembly.
The Wedge and the fins and the smaller wedgelets and some other covers (the Black Bits) are all TPU the Most done By the lovely Joe M (the bits that look good) and the rest by me, such fun. The Wedge and Forks (it has Forks) have some nice alu mounts with alu pins and R Clips retaining them. speaking of machining bits thear are also some nice 22mm motor mounts in the bot that also add a good amount of strength to the Chassis with some M5 tapped bits for bolts to enter.
The Tail Wibbles on a 12mm Alu pin with a thread and cap on top.
The Bots look was also on the list, less we not forget. he has to be looking dapper. Kat desighned some lovely looking Logos and they were then transfered to the Personal Computer and make in to sticky vinal paper shapes along with some random looking bits to go with the Name.
finally the bolts were done up and the last little bits put on. the wheels being finger tech foam bois, the wiring being squished in with a 3s lipo to power all and a 2 tooth 6mm Hardox Bar with dule Bottle openers… Because.
Such a safe young man.
Hope you enjoy another 90% Picture Build Log. I like pictures more than words 
x
