Failsafing your robot:
Had quite a few people asking about how to failsafe their drive & weapon at our ant event yesterday - we do have a full guide here: bbb.gd/failsafe - definitely give it a read, it’s important to ensure your robot stops dead when your transmitter is off.
If you’ve bought a pre-soldered FS2A flysky receiver from us (‘new style’) you set the failsafes on the transmitter (on FS-i6 it’s Menu > System Menu > RX setup > Failsafe) and there’s a video example here: https://youtu.be/4DGZOaQOzJU?t=89
If you’ve bought an un-soldered FS2A flysky receiver from us (‘old style’) you set the failsafes on the receiver by powering on your robot, set your sticks to stationary drive & weapon and hold the bind button on the receiver, the blue light will flash quickly several times then go solid.
Hope this helps!
